BQRQY - POXY PRIME CATALYST, DP701
- MSDS: BQRQY
- Manufacturer: PPG INDUSTRIES INC
- Product Name: POXY PRIME CATALYST, DP701
- National Stock Number: 8010-00N037177
Product Identification
Product ID:POXY PRIME CATALYST, DP701
MSDS Date:07/27/1990
FSC:8010
NIIN:00N037177
MSDS Number: BQRQY
Responsible Party
ALLISON PARK, PA 15101
US
Emergency Phone: 304-843-1300
Info Phone: 412-492-5555;800-245-2590
Cage: 47695
Contractor
Telephone: 1-800-245-2974 (CAL HYPO)
Cage: 47695
Ingredients
TOLUENE (SARA III)
CAS: 108-88-3
RTECS: XS5250000
Fraction By Weight: 5-10%
OSHA PEL 200 PPM/150 STEL
ACGIH TLV: 50 PPM; 9293
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
BUTYL ALCOHOL
CAS: 71-36-3
RTECS: EO1400000
Fraction By Weight: 50-55%
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ISOPROPYL ALCOHOL (SARA III)
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: 10-15%
OSHA PEL 400 PPM;500 STEL
ACGIH TLV: 400 PPM;500 STEL
XYLENES (SARA III)
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM;150 STEL
ACGIH TLV: 100 PPM;150 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
FILM FORMERS, RESINS, AND ADDITIVES
Fraction By Weight: 20-25%
DRYNESS, ITCHING, CRACKING, BURNING, REDNESS,
RTECS: 9999999ZZ
EMERGENCY ROOM OR PHYSICIAN IMMED. HAVE MSDS
RTECS: 9999999ZZ
MATERIAL, PERSISTENT SKIN/EYE IRRITATION OR
RTECS: 9999999ZZ
IN EXCESS OF A FEW INCHES.
RTECS: 9999999ZZ
LOWEST SUGGESTED EXPOS LIMITS, THE LEL IN FIRE &
RTECS: 9999999ZZ
DECOMP PRODUCTS DURING WELDING OR FLAME CUTTING ON
RTECS: 9999999ZZ
DETERMINE THE TYPE OF AIRBORNE CONTAM AGAINST
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST: HARMFUL/FATAL IF
SWALLOWED. EYE:CAUSES SEVERE EYE IRRIT. SKIN:MAY CAUSE MODERATE
SKIN IRRIT. MAY BE ABSORBED THRU THE SKIN. INHAL: VAPOR & SPRAY
MIST MAY BE HARMFUL IF INHALED. VAPOR IRR ITATES EYES, NOSE, &
THROAT. REPEATED EXPOSURE TO HIGH VAPOR CONC MAY CAUSE IRRITATION
OF THE RESP (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLT HAZ:SYS & PERMANENT BRAIN & NERV SYS DMG.
INTENTIONAL MISUSE BY DELIBERATELY CONC & INHALING THE CONTENTS CAN
BE HARMFUL/FATAL. CHRONIC:AVOID LONG TERM & RPTD CNTCT. SIGNS &
SYMPS: EYE WATERING, H DCH, NAUS, DIZZ, & LOSS OF COORD ARE
INDICATIONS THAT SOLV LEVLS ARE TOO HIGH. REDNESS, ITCHING, BURNING
SENS(SUPP DATA)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.
First Aid
First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH EYES IMMED W/PLENTY OF
WATER FOR @ LST 15 MIN. SKIN:REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & WATER. INHAL:IF AFFECTED BY INHAL
OF VA POR/SPRAY MIST, REMOVE TO FRESH AIR. APPLY ARTF RESP & OTHER
SUPPORTIVE MEASURES AS REQUIRED. OTHER:IF ANY OF THE FOLLOWING
OCCUR DURING/FOLLOWING USE OF THIS PRODUCT CONTACT POIS CTRL CTR,
(ING 7)
Fire Fighting
Flash Point Method:PMCC
Flash Point:50.0F,10.0C
Lower Limits:1.8%
Extinguishing Media:USE NFPA CLAS B EXTING (CARBON DIOXIDE, DRY CHEM,
OR UNIVERSAL AQUEOUS FILM FORMING FOAM) DESIGNED TO EXTING (SUPP
DATA)
Fire Fighting Procedures:WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY
BE USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP & POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. (SUPP DATA)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT/ELEC EQUIP/SPARKS/OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY TO HOT (SUPP DATA)
Accidental Release
Spill Release Procedures:PROVIDE MAX VENT. ONLY PERSONNEL EQUIPPED
W/PROPER RESP & SKIN & EYE PROT SHLD BE PERMITTED IN THE AREA.
REMOVE ALL SOURCES OF IGNITION. TAKE UP SPILLED MATERIAL W/SAWDUST,
VERMICULITE, OR OTHER ABOSO RBENT MATL & PLACE INTO CONTAINERS FOR
DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QTYS IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS B
FLAMM LIQUIDS.
Other Precautions:IF THIS MATL IS PART OF A MULTIPLE COMPONENT COATING
SYS, READ THE MSDS FOR THE OTHER COMPONENT(S) BEFORE BLENDING AS
THE RESULTING MIX MAY HAVE HAZ OF ALL OF ITS PARTS. CNTNRS SHLD BE
GROUNDED WHEN P OURING. AVOID FREE FALL OF LIQS (ING 9)
Exposure Controls
Respiratory Protection:OVEREXP TO VAPS MAY BE PVNTD BY ENSURING VENT
CTRLS. VAP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APRVD (TC-23C-) PAINT
SPRAY/AIR SUPPLIED (TC-19C-) RESP MAY ALSO REDUCE EXPOSURE. READ
RSP MFR'S INSTRUCTIONS & LITERATURE CAREFULLY TO (ING 12)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP THE CONC OF INGRED LISTED IN ING SEC BELOW THE (ING 10)
Protective Gloves:NITRILE RUBBER, NEOPRENE RUBBER, OR PVA.
Eye Protection:CHEMICAL WORKERS GOGGLES
Other Protective Equipment:WEAR PROTECTIVE CLOTHING INCLUDING
IMPERMEABLE APRON.
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING AND
SHOES.
Supplemental Safety and Health
EXTING MEDIA:NFPA CLASS IB FLAMM LIQ FIRES. FIRE FIGHT PROC:IF WATER IS
USED, FOG NOZZ ARE PREFERABLE. EXPLO HAZ:SURFS. TOX GASES MAY FORM
WHEN PROD IS CONTACTED BY FLAME/HOT SURF. HAZ DECOM PROD:FUME S
INCL: CARBON MONOXIDE, OXIDES OF NITROGEN. EFTS OF OVEREXP:& VISUAL
DISTURBANCES MAY INDICATE EXCESS EYE CNTCT.(ING 6)
Chemical Properties
HCC:F3
Boiling Pt:B.P. Text:>180F,>82C
Vapor Pres:10.7
Vapor Density:HVR/AIR
Spec Gravity:0.84
Evaporation Rate & Reference:101 (BUTYL ACETATE=100)
Solubility in Water:14.8%
Appearance and Odor:VISCOUS LIQ W/AN ODOR CHARACTERISTIC OF THE
SOLVENTS LISTED IN INGRED SECTION.
Percent Volatiles by Volume:82.50
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT W/STRONG ALKALIES, STRONG MINERAL ACIDS, OR STRONG ACIDS,
OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRODUCE HAZ DECOMP PROD WHEN
HEATED. WELDING, BRAZING, OR FLAME CUTTING ON SURF COATED W/PROD
MAY PRODUCE(SUPP DATA)
Disposal
Waste Disposal Methods:WASTE MATL MUST BE DISPOSED OF I/A/W FEDERAL,
STATE, AND PROVINCIAL, AND LOCAL ENVIRONMENTAL CONTROL REGULATIONS.
EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF THROUGH AN
APPROVED WASTE MANAGEMEN T FACILITY.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.